(03) 97939188
Australia
New Satori Easy-Up Stem Riser Quick Release Adaptor for 1-1/8" Stem 18cm.Brand new, never been used or installed. Feel uncomfortable when you're riding? Don't know what to do because cut off too much the top tube of fork? Like the frame very much but it's too small, aren't your size? Now, it's all fixed, use the Satori East-Up, can adjust the riser, at you choice. Easy install stem and adjust angle, once you set it up, doesn't need tools to adjust it
SR-38N ET: Pull up the stanchion at top position. Turn it to side and push down to the bottom
- Material: AL6061
- Color: Black
- Base Diameter: 28.6mm (1-1/8")
- High: 110~180mm
- Adjust High: 70mm
- 25.4mm and 24.4mm adaptor included
- Weight : 400g
- Made in Taiwan
- Warranty: One year
| SKU | SR-38N @ Stock: 44 M3L1 |
| Barcode # | 637230609415 |
| Brand | SATORI |
| Shipping Weight | 0.2000kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.100m |
| Shipping Length | 0.400m |
| Shipping Cubic | 0.002000000m3 |
| Unit Of Measure | ea |
Cycling Deal provides FREE shipping for orders over $20 (Conditions Apply) and incredibly competitive rates for those with smaller orders too.
From our base in Melbourne, we aim to get your order to your doorstep no matter where you are across Australia in the quickest timeframe possible.
You don't have to take our word for it though - once you've ordered you'll be able to track your order with the courier company bringing your purchase to you!
For EU/UK customers:
The new VAT taxation policy will take effect from July 1st 2021. We do not collect VAT at the time of purchase, so you may have to pay VAT as well as a manual handling fee when your order is being cleared at the customs. Please be aware before making the purchase.
Worked very well
Keith R.Worked very well
All good
Ken T.All good
EasyUP ET
This purchase has been one of my better. Due to severe Arthritis in my neck and shoulder I needed to lift the Handlebars. This product did just that. Very easy to fit however you do need to drive the StarClamp down the fork tube which means the only way to go back to your previous set up is to get a new StarClamp. I fitted the unit in less than 10 minutes and I am an amateur/bush mechanic. You also need a Torque Wrench so you don't over tighten any bolts, particularly with Carbon or Aluminium components. Now for the possible problems. In raising the Handlebars the cables for Brakes and Gear change need to be long enough. In my case I could only raise about 75% of the full height. The only cable not long enough was for the front brake which I have now replaced. Remember to lengthen a cable you need a new longer outer and inner cable.
