Buy Bike Bicycle Fork Headset Star Nut Setting Tool

Bike Bicycle Fork Star Nut Setting Installer Install Tool with 2 Free Star Nuts - Size 1-1/8”

Roll over image to zoom in

$27.99

RRP $39.99

SAVE $12.00 (30%)

In Stock : 10+

Shipping Warehouse	Australia

Free Shipping Australia Wide

Calculate Shipping

PERFECT SETTING: The star nut needs to be tapped into the fork steerer at the right position. Too low, the headset bolt cannot reach. Too high, the star nut cannot bite the steerer wall tightly.
COMPATIBILITY: The Threadless Nut Setter is used to install the star-fangled nut found on 1-1/8” threadless headset systems.
EASY TO USE: Install the star nut onto the tool and tap it into the fork steerer using a hammer.
HEAT TREATED: Heat treated high-quality steel constructed for a long time using.
ORDER NOW, WORRY-FREE! We're so confident about the product quality that we can provide a lifetime warranty! Made in Taiwan.

SKU	YC-113A @ Stock: 36 I19L2
Barcode #	610696768216
Brand	CyclingDeal
Shipping Weight	0.2000kg
Shipping Width	0.060m
Shipping Height	0.030m
Shipping Length	0.080m
Shipping Cubic	0.002000000m3
Unit Of Measure	ea

Cycling Deal provides FREE shipping for orders over $20 (Conditions Apply) and incredibly competitive rates for those with smaller orders too.

From our base in Melbourne, we aim to get your order to your doorstep no matter where you are across Australia in the quickest timeframe possible.

You don't have to take our word for it though - once you've ordered you'll be able to track your order with the courier company bringing your purchase to you!

For EU/UK customers:

The new VAT taxation policy will take effect from July 1st 2021. We do not collect VAT at the time of purchase, so you may have to pay VAT as well as a manual handling fee when your order is being cleared at the customs. Please be aware before making the purchase.

Write a product review

Easy to use

Luke

By: Luke
Made installation of my new forks quick, easy and accurate.

Star. Nut fitting tool

barry c.

All I can say is this is a great tool and very easy to use.

Star nut + installer tool

Stephen W.

Great bit of kit. Made installing the start nut a breeze!

It does what it says

Andrew D.

After 12 months on the bike I am fitter and have lost a fair amount of weight so its time to drop down the bar height. To do this I needed to remove the old star nut (with a piece of dowel and mallet) cut the steerer to length ( I used a standard plumbers pipe cutter) then installed the new star nut with this tool. The job took less than 30 minutes and worked flawlessly. Whilst I could have done the job without a specialist tool its not worth the risk on an expensive bike. My LBS quotes a standard fee of $50 + parts for this service and as I have 2 bikes I saved $100 ($80 after the cost of the tool). BTW there are plenty of good 3 minute YouTube videos on this subject and its worth watching one to make certain you install the star nut correctly to keep you safe out there.