(03) 97939188
Testimonial RACE7.0D MTB
Author: Dean Date Posted:26 November 2010
Dean
Here it is in the flesh. I'm pretty happy. Done stuff all riding on it so far and learned quite a lot of what to look out for when buying a bike on the internet. Getting some clipless pedals ASAP, but otherwise it's now in full trim
Where bought and price
Cyclingdeal.com.au for $989.00, plus about $60 shipping from Melbourne to Canberra.
How it is used
Cross country riding around Canberra (Mt Stromlo etc) - an average of one ride a week to break up the otherwise roadie focused tempo (I suppose that makes me a MTB weekend warrior). It also does the occasional low speed spin around the local bike paths with the kids.
Disclaimer
I am a roadie (since the early ‘90s - my racing glory days) and this is my first MTB. I reckon I know my way around road bikes, but this is the first MTB I have ridden for any amount of time and the first I have ridden off road. I have no MTB experience to compare this bike against, so you might want to keep that in mind.
Description
The heart of this bike is a 7005 Aluminium hard tail frame. The frame is welded (of course) and has a CNC cut-out in the head tube with a carbon fibre sleeve insert in its place. This sleeve might shave a gram or two (though I doubt it), but has no practical use as far as I can see. It appears to be a glorified way to present the head badge, which seems a bit of overkill, but there is nothing really wrong with it I suppose.
The frame, despite its low cost, seems to have a competition heritage. There are no bosses for panniers and what not, and generally the way it handles suggests to me (a MTB noob remember) that it would not be out of place on a XC start line, though I'm not sure of its weight.
Otherwise the equipment highlights are:
- Rockshox Tora SL fork.
- Shimano SLX transmission (except for a Deore FD), the cassette and chain are Shimano too; the crankset is a Truvativ ‘fived'.
- Avid Juicy 3 hydraulic disc brakes.
- Mavic 317 Disc rims laced to Hasa branded hubs with black anodised SS spokes (28-spoke 2-cross at both ends)
- Continental Explorer 26" x 2.1" tyres
- Hasa branded aluminium bars, stem and seatpost.
- San Marco Ponza (made in Taiwan) saddle.
- Comes with Wellgo flat pedals which, according to someone I spoke to, are copies of the old Shimano XT pedals. They seem quite good for what they are, but I have replaced them with Shimano clipless MTB pedals.
It is available with 16", 18" and 20" frames.
Positives
This bike has a high standard of specifications for its price. There is not, as far as I could find, any other c.$1000 MTB available with a Tora fork and hydraulic brakes. You might find a model run out deal to match it, but I think you would be doing pretty well.
The frame is well finished with neat, sturdy looking welds and the quality of the paint job, though not flawless, is high. On the trails the bike handles well, going where you want it to go and it feels sure footed. The frame, though still fairly new of course, is well made and feels like it will stand the punishment well. The guy I ride with is a downhiller and even on his XC bike goes downwards pretty aggressively. Trying to keep up with him gives my bike a vigourous workout and there's been no problem, and I have no reason to expect one.
The mostly SLX drive train works well at all times and there are no complaints about that. Similarly the Avid Juicy 3 brakes pull you up nicely and offer pretty good modulation. There are, no doubt, better brake systems around, but these offer good bang for the buck.
The dealer offers a very good warranty: 5 years on the frame and 1-2 years on the parts.
Negatives
There are no real negatives, just a few quibbles:
- The Truvativ cranks are not very pretty, but do the job well enough for my needs. If I ever get MTB upgraditis (so far I only have the road strain) these will probably be the first thing to go.
- The stock seatpost was a 300mm job, which was too short for my needs. I bought a $17 replacement post from Velogear.com.au, which I have to say is an excellent basic post and maybe the best value piece of kit I have ever bought.
- The wheels are a bit of an unknown quantity. The Mavic rims are good (as you would expect) but the hubs are Taiwan generic, which could be good or bad in the long term. The wheels needed some tweaking when I got the bike (see below), but so far they are doing well and in all likelihood will last for ages. They are also cone and race bearing hubs, which I do not think is a negative, but for some people anything without cartridge bearings is a throwback to steam trains and whale oil lanterns - depends on your point of view.
- The QR seatpost clamp has been troublesome in that I have had difficulty adjusting it correctly to be releasable and also clamp properly. Maybe I just have not found the sweet spot yet, but in the meantime I have just cranked the bolt up and I am using it as a non-QR clamp.
- The stock saddle is a bit on the minimal side and may not suit everyone, though I have found it fine.
- You can have a white one, or a white one! The white's nice, but the black ones on the Hasa website look better I must say.
Additional notes
Buying a Hasa was a bit of a punt. It is not a known brand here and I did a fair amount of internet searching to try to find out more. There was not a lot of info, but the upshot of my searching was that Hasa is in fact a real bike company located in Taiwan. Their bikes are not uncommon in parts of Asia and, if the photos are to be believed, their MTBs at least are ridden in races there. There are some suggestions on the intertubes that they also make stuff for other well-known major bike makers (Doesn't everyone in Taiwan?).
To buy one in Australia requires you, as far as I know, to make an internet purchase from Cyclingdeal.com.au. This means you cannot try before you buy (though they are amenable to lay-by, and you can visit them if you are in Melbourne) and once you have it you need to get it road (trail?) worthy. The bike is advertised as 95 per cent assembled, and that is true, but that assembly is as it left the factory in Taiwan. You need to arrange the other 5 percent. Putting on the bars and stem is easy enough, but you also need to check everything is tight, tune the gears, set up the suspension and make sure the brakes work. In short do all the things a LBS does pre-delivery (or at least should do). I assembled it myself, but being a MTB noob I took it to my mechanic (who is not in a LBS) to check out. He found a few things that needed attention, mostly in the wheels where the hubs needed some grease, the cones were not as well adjusted as they should be, and where the rims needed a few tweaks in the truing stand. Depending on your skills you may need to factor in paying a mechanic to give it a good once over.
Internet buying also means you cannot modify the setup before delivery. As I said I have been up for a new seatpost and will probably go for a longer stem soon too.
I found Cyclingdeal good to deal with and responsive to my queries.
Recommendation
I would be lying if I said I was not a touch apprehensive about buying this bike, but now that I have it there was no reason to be. It is a good machine and excellent value for money. I am enjoying the XC riding I am doing on it and the general impression is that it is a well built bike which should last as long and perform as well as many more expensive and/or better known bikes. If you are new to MTB you could do a lot worse than buying one of these, and if you are an old hand on a budget I reckon you would probably be pretty happy too.
OVERALL SCORES
Quality 
Performance
Value for money
Postscript
I note that on Cyclingdeal.com.au this bike (the 2009 model) is presently (mid-December 2009) selling for $900 plus shipping. The 2010 model is now available for $990. The new model seems to be basically the same bike with a new paint job and a remote lock out for the fork.
