(03) 97939188
BIKEHAND 3 in 1 Bicycle Bottom Bracket BB Removal Tool for Shimano Hollowtech II FSA Sram
$34.99
RRP $39.99
SAVE $5.00 (12%)
In Stock
:
10+
 Australia
|
Free Shipping Australia Wide
Calculate Shipping
- This BIKEHAND YC-307BB is a triple-ended bottom bracket wrench. 30cm whole length to provide greater leverage and is made with high-quality steel for improved functionality and longer life.
- COMPATIBILITY I: Shimano 16-Notch X 44mm: Fits 16-notch, 44mm diameter external bearing bottom bracket cups including Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King, and Phil Wood outboard bearing. NOTE: Will fit Shimano TL-FC24 and TL-FC25 adapters.
- Compatibility II : 16-notch bearing cups with an outside diameter of 41mm. Such as Shimano BBR60 Ultegra
- Compatibility III: 16-notch bearing cups with an outside diameter of 39mm. Such as Shimano Dura-Ace 9000 series and XTR 980 series, BB9000
- Top quality Made in Taiwan. 2 Year Warranty
| SKU | YC-307BB @ Stock: 175 I18L1 |
| Barcode # | 9504157054349 |
| Brand | BIKE HAND |
| Shipping Weight | 0.3500kg |
| Shipping Width | 0.060m |
| Shipping Height | 0.010m |
| Shipping Length | 0.300m |
| Shipping Cubic | 0.000420000m3 |
| Unit Of Measure | ea |
Cycling Deal provides FREE shipping for orders over $20 (Conditions Apply) and incredibly competitive rates for those with smaller orders too.
From our base in Melbourne, we aim to get your order to your doorstep no matter where you are across Australia in the quickest timeframe possible.
You don't have to take our word for it though - once you've ordered you'll be able to track your order with the courier company bringing your purchase to you!
For EU/UK customers:
The new VAT taxation policy will take effect from July 1st 2021. We do not collect VAT at the time of purchase, so you may have to pay VAT as well as a manual handling fee when your order is being cleared at the customs. Please be aware before making the purchase.
Bikehand 3 in 1 BB tool
Eric Van DoornBy: Eric Van DoornGood sturdy tool. Does the job well. Cheaper than name brands.
excellent
John V.good.
Bottom bracket tool
terry d.Excellent value and construction. Prompt delivery. All good as per usual.
Lifesaver!
vincent s.Purchased this tool to fit new Hollowtech II BB, didn't want to spend too much on it as I figured it may be the only time I'll ever need it. Tool was cheap did the job with ease and it is the same brand as my pedal/wheel tool which is still going strong after many years so if I need to pull this tool out every few years to replace the BB I suspect it will still be going strong for at least another 15 to 20 years.
Great service
michael p.Great service
Excellent product
Taha K.Excellent all in one bottom bracket tool. Solid construction. The long handle provides good leverage. Was delivered timely and is great value.
Works withball 3 hollowtech stds
Ken S.Great quality
Toolrific
David M.Received tool quickly. Fitted nicely onto the Bbr60. Bottom bracket on and working great. Only issue was the slight angle of the tool for the bbr60 side.
All in one Shimano bottom bracket tool.
Paul B.Purchased the tool to fit Shimano Hollowtech II bottom brackets. After installing 3 bottom brackets in the last few weeks I can say it works perfectly. The bottom brackets were from several different groupsets. There was an XTR, a 105 and an Ultegra bottom bracket. The tool worked perfectly on all of the bottom brackets. Ideally the BB should be torqued but for an experienced user this would not be a significant issue. All BB installed with the tool have well over 100 kms and no issues. The quality is a 4/5 or better. Not enough use to test longevity, however I expect that it will last for years.
good product
Gregor H.great value very versatile and good quality
good tool
Tom V.Great for the money. Does what it says well
Bottom bracket tool
David B.Does everything it's supposed to do. Well made - excellent quality. Very happy with the purchase.
